Contractors must have current registration and insurance on file to pull permits.
Contractors can complete their registration through Visual Vault prior to issuing permit.
All code requirements for electrical permits are available in Chapter 23.10 ELECTRICAL CODE
The process to apply for a permit takes about 10 minutes.
You will need to create an account at Citizen Access as a contractor.
A walkthrough guide is available under the Citizen Access Information page
Are you needing the legal address? Use the County Assessor's Site.
Is your project in a commercial building or shared property space? Use the GIS Map.
Applicants can apply in person at the City Building or online.
Paper applications can be mailed in with a check to:
City of Lincoln
Attn: Building and Safety Department
555 S 10th St, Room 203
Lincoln, NE 68508
You can pay online through Citizen Access
You’re able to use a Visa, Mastercard, American Express, or Discover.
All permits will have a minimum $35 fee. Additional fees may apply.
Once the permit has been issued it needs to be inspected. A rough in inspection is called for when there is wiring/conduit that is done that will be concealed by building finish. A final inspection is called for when all the electrical work has been done, a service inspection is requested when the service installation is complete.
You can schedule an inspection through Citizen Access or calling the 24 -hour inspection line at 402-441-5999.
Please have your permit number, date for inspection, and access instructions if necessary.
Non-compliance with the codes may result in a reinspection fee.