Version 6 - Date: 06/30/2017
Overview
The City of Lincoln/Lancaster County has adopted geographic information system (GIS) technologies to store, manage and maintain geospatial-related data. The majority of the private engineering community utilizes computer aided design/drafting (CAD) tools for the creation of data such as subdivisions, water systems, storm drains, rights-of-way, pavement edges, etc. It is the goal of the City/County to expedite the review process by applying standards to the submittal of CAD and GIS data.
This document shall be considered the Standard for which contractors submitting data shall abide by. Data that does not adhere to these standards may be rejected by the City of Lincoln as inappropriate for use.
CAD\GIS Data Standards - Coordinate System
All geospatial data shall be submitted in the following Lancaster County Low-Distortion coordinate system, more defined as follows;
- Projection:
- Transverse (UTM)
- Units:
- U.S. Survey Feet
- Spheroid:
- GRS80
- Datum:
- NAD83
- Scale Factor:
- 1.000054615
- Central Meridian:
- -96 41 17
- Projection Origin:
- 40 15 00
- False Northing – meters:
- 0.0
- False Easting – meters:
- 50000
- Vertical Datum:
- NAVD88
CAD\GIS Data Standards - Format
Geospatial data shall be submitted in a format compatible with the City of Lincoln/Lancaster County’s GIS system. Acceptable formats are as follows;
- ESRI Geodatabases (file or personal)
- MicroStation .DGN (v8 and above)
- AutoCAD .DWG (Up to Version 2017)
CAD Layering/Level Standard Naming Convention
The Layer/Level Naming standards listed below are a subset of the City of Lincoln\Lancaster County CADD standard specific to the submittal of subdivision plats.
CAD Standards - Levels(PDF, 1MB)
Geodatabase Layer |
CAD Layer Names |
Color |
Weight |
Linestyle |
Type5_Subdivisions.Type5Arcs |
SUB-Subdivision |
119 |
4 |
6 |
Type6_LotsUnits.Type6Arcs |
SUB-Lot_Line |
201 |
1 |
0 |
Type6_LotsUnits.Type6Arcs_R |
SUB-ROW |
66 |
3 |
0 |
StreetCenterline |
SUB-Centerline |
3 |
3 |
4 |
Type9_Encumbrances_BlanketUtility.Type9Arcs_BU |
SUB-Easement_BlanketUtility |
192 |
1 |
1 |
Type9_Encumbrances_Conservation.Type9Arcs_C |
SUB-Easement_Conservation |
192 |
1 |
1 |
Type9_Encumbrances_Electric.Type9Arcs_E |
SUB-Easement_Electric |
192 |
1 |
1 |
Type9_Encumbrances_Flood.Type9Arcs_F |
SUB-Easement_Flood |
192 |
1 |
1 |
Type9_Encumbrances_IngressEgress.Type9Arcs_IE |
SUB-Easement_IngressEgress |
192 |
1 |
1 |
Type9_Encumbrances_SanitarySewer.Type9Arcs_SS |
SUB-Easement_SanitarySewer |
192 |
1 |
1 |
Type9_Encumbrances_StormWater.Type9Arcs_SW |
SUB-Easement_StormWater |
192 |
1 |
1 |
Type9_Encumbrances_Utility.Type9Arcs_U |
SUB-Easement_Utility |
192 |
1 |
1 |
Type9_Encumbrances_WasteWater.Type9Arcs_WW |
SUB-Easement_WasteWater |
192 |
1 |
1 |
Type9_Encumbrances_WaterMain.Type9Arcs_WM |
SUB-Easement_WaterMain |
192 |
1 |
1 |
PointOfBeginning |
SUB-POB |
78 |
2 |
0 |
|
SUB-Street_Txt_Name |
64 |
0 |
0 |
|
SUB-Subdivision_Txt_Name |
0 |
0 |
0 |
|
SUB-Subdivision_Txt_Dim |
0 |
0 |
0 |
|
SUB-BlockNumber_Txt |
3 |
0 |
0 |
|
SUB-Lot_Txt_Number |
68 |
0 |
0 |
|
SUB-Lot_Txt_Dim |
0 |
0 |
0 |
|
SUB-Streets_Txt_CurveData |
0 |
0 |
0 |
|
SUB-Subdivision_Txt_CurveData |
0 |
0 |
0 |
|
SUB-Lot_Txt_CurveData |
0 |
0 |
0 |
|
SUB-Easement_Txt |
64 |
0 |
0 |
CAD File Submittal - Accuracy
All references to accuracy of the subdivision plat shall refer to the Lincoln Municipal Code, Chapter 26.19, as well as the County Zoning Regulations.
CAD File Submittal - Supplemental Information
Line work Details
All line work shall be represented by single part line segments consisting of a starting point, and an ending point only. Multiple vertex polylines are not allowed.
Point Details
Included within the associated dataset will include a point representing the True Point of Beginning for the associated boundary. Said point shall include a minimum of X and Y values located in Lancaster County Grid coordinates as Feet, or as Latitude\Longitude. Z values can be added as an option.
Annotation Details
Each segment included in the submittal shall be dimensioned to the 1/100th of a foot (X.XX’), and shall be denoted as either a Platted Distance or a Measured Distance. This shall be defined as placing a (M) for ‘measured’, or a (P) ‘platted’ behind the corresponding distance.
For example - 131.49’(P) 131.58’(M) or 131.50 (M&P)
Note: All Curve Data shall consist of information regarding any curve on a property, boundary, or centerline. Curve data shall include all of the following;
- Radius
- Angle
- Tangent
- Length
- Chord Distance
- Chord Bearing
All points must be stored as a “POINT” feature, or a “Block Reference” or a “Cell” with the insert point of the feature being the centroid.
CAD File Submittal - Template Files for Download
The followings files can be downloaded and used as templates;
All template downloads are in zip format.